Products & Support > 3D Imaging Analysis System TAS7000 > Specifications
TAS7000

Exhibition Information

TAS7000

3D Imaging Analysis System


The TAS7000 (*1) 3D (*2) imaging analysis system exploits the unique properties of terahertz waves (*3).The TAS7000 enables 3D non-destructive analysis of the internal structure and chemical composition of the target object; the results are shown on a 3D display. In addition, this system enables measurement of spectral characteristics and 2D mapping.
Advantest has developed an unprecedented solution for 3D analysis of industrial materials such as plastics and ceramics, as well as pharmaceutical products.
(*1) TAS7000: This system was developed by Advantest in collaboration with Prof. Dr. Kodo Kawase of Nagoya University.
(*2) 2D: Two-dimensional 3D: Three-dimensional
(*3) Terahertz waves: Region of electromagnetic spectrum between hundred gigahertz to tens of terahertz.


Specifications

Applications
 Non-destructive analysis, 3D constituent density distribution analysis, 3D spectroscopic measurement
Analytical functions
2D / 3D computed tomography (CT) density distribution analysis
Terahertz spectroscopic transmission analysis:

2D / 3D CT spectroscopic measurement mode

2D spectroscopic measurement mode
(mapping measurement)

Spectroscopic measurement mode
Analytical frequency range (*1)
 High dynamic range module : 0.02THz to 0.6THz
Broadband module (*2) : 0.05THz to 3THz
Dynamic range (*1)
 High dynamic range module : >60dB (at peak, 3min.)
Broadband module : >50dB (at peak, 15min.)
Spatial resolution of CT measurement function (*1)
 <3mm
(using wire phantom; modulation transfer function (MTF), 10%)
Throughput
 Maximum waveform acquisition speed : 250Hz (Spectroscopic measurement mode)

Acquisition time for CT cross section : <15min. (Measurement of 1 CT cross section is divided into 64x64)
Maximum sample size and weight
 <Φ310mm (12.2inch) × 310mm (12.2inch) (H)
<20kg

General specifications
Operating environment
 Temperature : +10°C to +30°C
Relative humidity : <80% (non-condensing)
Power requirements
 AC100V (100-120) / 200V (220-240), 850VA, 50/60Hz
Dimensions
 Size : 1500mm (W) × 1570mm (D) × 1600mm (H)
Mass : 400kg or less (*3)
(*1) At temperatures of 23°C ± 5°C
(*2) With dry air option
(*3) Including analysis unit and CT test bench carrier, excluding hardware options and PC